BECOME A DEALER

Cart 0
Billet Rear Differential Brace Hellcat Srt Scat 392 Redeye For Dodge 2015+ Std
Billet Rear Differential Brace Hellcat Srt Scat 392 Redeye For Dodge 2015+ Std Billet Rear Differential Brace Hellcat Srt Scat 392 Redeye Billet Rear Differential Brace Hellcat Srt Scat 392 Redeye Billet Rear Differential Brace Hellcat Srt Billet Rear Differential Brace Hellcat Srt Scat 392 Redeye

Billet Rear Differential Brace Hellcat Srt Scat 392 Redeye

Shipping calculated at checkout.
Available 20 In Stock
secure checkout

*** IMPORTANT NOTE: Order processing can take up to 1-2 business days. Shipping timeframes start after the order processing has been completed. ***

Billet Rear Differential Brace Hellcat Srt Scat 392 Redeye For Dodge 2015+ Std


The 2015 and newer Charger and Challenger vehicles, have been known to have differential case failures. This was designed to help aid in preventing that from occurring.

  • Intended to help prevent differential case failures
  • Case failure, can cause additional damage to the drive shaft and other parts of the vehicle
  • Made of Billet Aluminum 
  • Red Powder Coat
  • Access to fill and drain plugs
  • Clears aftermarket exhaust systems
  • Includes hardware as pictured

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
S
Scatpack 392
Good Brace for the money but Modification needed

Received the brace with no issues. All components look good out of the box. 1st issue I ran into was the little metal plates that go into the frame were to large. I spent about 45 minutes test fitting them from the outside because once you try and drop them in the little slots in the frame, you better be sure they are good because getting them out would be a pain in the rear (if you get my drift). I had to grind them enough to fit but not spin around in the frome while trying to tighten the bolts. They have to be wide enough not to spin but large enough to fit in the frame and line up with the hole. 2nd issue was the bolts that go up and into the frame where those metal plates go are not long enough. The bolts should be about a 1/4 inch longer. I had to remove the washers to get them to bite into the metal plate threads. The rubber piece prevents the bolt from being long enough. If they had just included longer bolts it would have worked fine.

We Also Recommend

K- Swap Driver Side Radiator Hose Kit W/ Fan Hose Bung K20 EG EK DC2 CRX Si 🇺🇸 - Jack Spania Racing

K- Swap Driver Side Radiator Hose Kit W/ Fan Hose Bung K20 EG EK DC2 CRX Si
Shifter Shift Box Cables K Series K20 K24 K20Z3 K Swap 06-11 Civic Si EG EK Si - Jack Spania Racing

Billet Shifter Shift Box Base Plate Cables Kit for TSX Accord K Series
3" K Series K20 K24 Drag Header 4-2-1 Tri-Y EK EG Honda Acura DC2 Civic V Band - Jack Spania Racing

3" K Series K20 K24 Drag Header 4-2-1 Tri-Y EK EG Honda Acura DC2 Civic V Band
RSX Shifter Cables & Trans Bracket K20 K20A K24 K Swap Series EG EK DC2 Race USA - Jack Spania Racing

RSX Shifter Cables & Trans Bracket K20 K20A K24 K Swap Series EG EK DC2 Race
Bypass Block Plug for Subaru Impreza WRX STI Atmospheric Blow Off Valve 1” Inch - Jack Spania Racing

Bypass Block Plug for Subaru Impreza WRX STI Atmospheric Blow Off Valve 1” Inch